Most units are soldered in, so be prepared to desolder the old one to replace it. Hopefully, you will never need a battery replacement on the Demon1, Quarterhorse, Ostrich2, or Roadrunner. The RJ-type-looking connector you see in the picture is for the CABL1 and CABL2, and it is not a standard RJ-type connector. Comes with a 6-ft USB cable, but requires either the CABL1 or CABL2 for connection to the car, depending on your application. Self-powered via USB, and it has a built-in switch to select mode (up=10k, middle=open, down=short) for the A-B pins.
#Gm aldl software#
Not for use with the 'Moates' ECM852 software or other DOS-based programs. Will do 160-baud and 8192-baud communication.
#Gm aldl windows#
Compatible with all the popular programs in Windows (TunerPro, DataMaster, WinALDL). Works great, unlike most USB/Serial converters.
#Gm aldl Pc#
Goes between your PC and a CABL1 or CABL2. Put a 27SF512 chip in it, and switch the wire lead to chassis ground to switch between two separate programs! Comes with a 27SF512 chip.ĭoes not work by itself, needs the CABL1 or CABL2 to work! USB-based ALDL converter box. It has a single wire lead coming off of it. This little gem plugs into your 28-pin socket that normally takes a 27C128 or 27C256.
It is extremely small and compact, durable, versatile, and powerful. The newest breed of emulator has evolved! This is the newest Ostrich, the 2.0 unit.
If you are not sure whether this unit is the right choice for you, please email support prior to purchase. It is not for Hondas, Nissans, Fords, BMWs or other cars. PLEASE READ through product documentation to understand some of the features of this all-in-one, datalogging, realtime emulation tuning, and chip burning hardware. Includes AutoProm device, 28-pin 18-inch emulation cable, OBD1-style ALDL cable CABL1, 6-ft USB cable, 2x 27SF512 chip, and Mark Mansur's TunerPro RT5 software license. Has 3-channel 0-5v 10-bit A/D provision fpr wideband and other datalogging. Performs ALDL communications at 160/8192 baud, programs AT29C256 and 27SF512 chips. Chip burning/reading, datalogging, and realtime emulation. Mini-USB cable is included.ĭoes everything in one package, one USB-based device! USB-powered, so no power supply needed. Comes with stand-alone chip programming software (available for download). While it will only program the three types of chips listed, please note that those three chips can be used as drop-in replacements for most EFI applications. Self-powered from the USB port, so no power adapter is needed! Burner can also be used to read stock GM memcals using the HDR1 adapter. USB Chip Programmer works with the AT29C256, 27SF512, and AM29F040 chips. This item can be used with TunerPro RT, TTS Datamaster, TunerCat reflash for LT1, WinALDL, and EFI Live V4(OBD1). You use the 10k mode for older TBI and TPI setups, and the 'Open' for newer Speed density and LT1 stuff.
There's a switch on the side which allows you to select 10k (across pins A&B of ALDL) or 'Open' mode. Comes with XtremeALDL and NewCABL1 (RJ45/Moates-specific new style). You should be able to datalog all of them, and reflash the 94 LT1 as well. This is for any pre-1995 (OBD1) GM vehicle. Top› Catalog› GM 1985-1995 GM OBD1 Pre-1996 devices: A collection of products which have been used on GM OBD1 vehicles for datalogging, reflashing, chip adaptation, chip programming, and realtime emulation.
0 kommentar(er)
